Skip Navigation

Universal 1 Series - Rectangular Flange - Positive Displacement Pumps

FEATURES

Specifically designed to pump "unpumpable" products; such as dough, meat emulsion, puddings and cheese, that cause bridging and cavitation in conventional pumps. Six models feature inlet ports ranging in size from 7.13 to 86.87 square inches. Benefits

  • 316 stainless steel body
  • Large, rectangular inlet port
  • Non-galling Waukesha "88" alloy rotors
  • Maximum pressure: 200 psi (13.8 bar)*
  • Temperature range:-40°F (-40°C) to 300°F (149°C)

* Contact Application Engineering for higher pressure or higher temperature applications.

Key Applications

Pet Food

Meat emulsion

Dough

Puddings

Cheese

MODEL 014

0-800 RPM speed range. 1" discharge port; optional 1½" port size available; suitable to 200 PSI (13.8 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).


 
A
AA
AOL
B
CP
CP1
CP4
DL
E
F
H
I
J
L
U
X
2X
IN
6.75
1.95
12.50
4.13
12.04
13.47
15.25
8.88
.38
2.31
.41
7.66
2.12
9.61
.875
3.63
7.11
MM
171
50
318
105
306
342
387
226
10
59
10
195
54
244
22.23
92
181

 
C
CA
CB
CC
FA
FB
HA
PA
PB
PC
PD
IN
.50
1.62
6.50
.50
2.63
7.50
.41
1.44
4.94
.59
1.28
MM
13
41
165
13
67
191
10
37
125
15
33

 

CP= Standard Cover, CP1= Jacketed Cover, CP4= Manual Vented Cover, Connection sizes for Jacketed Covers are ¾"-14 NPT on Models 014-U1 to 034-U1, 1"-11-½ NPT on Models 064-U1 and 134-U1.

Dimension 'X' and '2X' apply for Bevel Seat, "S"-Clamp, "Q"-Clamp, 15I and 14I fittings.

Approximate shipping weight 70 lb. (32 kg.) pump only.

NOTES: Dimensions are for guidance purposes only. Contact your WCB Representative if more detailed measurements are needed. Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized WCB personnel prior to placing an order. WCB is not responsible for unauthorized or incorrect selections resulting from the use of these curves.

Pump Curve 95-07146 - Rectangular Flange Model 014-U1 || PDF

Body Standard:  316L Stainless Steel Options:

  • Flush taps for future double seals
  • Body retaining screws

Ports Standard:  S-Line Options:

  • Bevel Seat, I-Line, Q-Line; European DIN, SMS or RJT
  • Male NPT, 150 lb. & 300 lb. Flanges. (150 lb. standard on Model 320)
  • Rectangular Flange Inlet or Aseptic ports
  • Extended ports
  • Optional port sizes on 6, 18, 30 and 60 Models

Covers Standard:  316L SS plain cover with 3-Wing cover nuts Options:

  • Vent or drain connections
  • Aseptic, jacketed or vented
  • Hex cover nuts

Rotors Standard:  Alloy 88 Twin Wing. Standard clearance for up to 180° F (82° C) Options:

  • Hot clearance to 300° F (149° C)
  • Clearance above 300° F (149° C) on application
  • Special & front face clearances and slotted rotor hub for special applications
  • Single wing for 30, 60, 130 and 220 models for minimal particulate damage

O-Rings Standard: Buna-N Options:

  • Fluoroelastomer (FKM)
  • EPDM
  • Silicone
  • Perfluoroelastomer (FFKM)
  • FEP Encapsulates

Seals Standard: Single Buna-N O-Rings with Zirconia sleeve Options:

  • 316L SS sleeve
  • Double O-Ring Seal with Flush Connection
  • Single Mechanical Seal with Carbon (One Piece) vs. Ceramic Seal Faces
  • Double Mechanical Seal with outer Carbon Seal Face & Flush Connections
  • Chrome Oxide, Silicon Carbide, & Tungsten Carbide Seal Faces
  • Two piece carbon inner seal

Gearcase Standard: Cast iron powder coated, 316L SS shafts, top shaft position, stainless Steel bearing retainers, left hand shaft position Options:

  • Stainless Steel gearcase
  • Steel-It paint
  • 17-4 PH shafts
  • Lower shaft position
  • Bearing Isolators
  • Pedestal shims for side mounted pumps. Left hand shaft position standard
  • Right hand shaft position on side mounted gearcase

Bases Standard: Flat plate, epoxy painted, with adjustable feet, SS coupling guard, and Lovejoy or Woods coupling Options:

  • 304 SS unpolished plate base with adjustable feet
  • Portable base with rubber wheels
  • SS tubular bases

Drives

  • WCB ISR Integral Speed Reducer Sizes 49, 79 and 239.
  • Direct connected gear motors.

Tru-Fit® Close coupled Tru-Fit® pump mounted on stainless steel base with stainless steel adaptors standard. Features:

  • No shaft alignment necessary. No coupling guard required.
  • Special base design enhances cleanability.
  • Reduces overall length of complete unit by an average of 20-25%.
  • Average of 20-25 gear ratios available per horsepower.
  • Separate oil sump for gear reducer and timing gears.

Options:

  • 304 SS polished plate base.
  • NEMA or IEC frames available. Right angle reducer also available for additional space savings.
  • 1/2 through 60 horsepower drive options available.
  • Horizontal or vertical porting.

Click on the links below to download pump model performance curves for Universal 1 Series Rectangular Flange Positive Displacement pumps.

Download Instructions for Reading Positive Displacement Pump Curves || PDF
  • Universal 1 Series Rectangular Flange - Model 014 - Performance Curve - 95-07146 || PDF
  • Universal 1 Series Rectangular Flange - Model 024 - Performance Curve - 95-07147 || PDF
  • Universal 1 Series Rectangular Flange - Model 034 - Performance Curve - 95-07148 || PDF
  • Universal 1 Series Rectangular Flange - Model 064 - Performance Curve - 95-07149 || PDF
  • Universal 1 Series Rectangular Flange - Model 134 - Performance Curve - 95-07150 || PDF
  • Universal 1 Series Rectangular Flange - Model 224 - Performance Curve - 95-07151 || PDF
  • Universal 1 Series Rectangular Flange - Model 324 - Performance Curve - 95-07152 || PDF

Downloads