S200 Series - Stainless Steel Centrifugal Pumps
FEATURES
All product contact components are machined from wrought less than 5% ferrite level, 316L SS and feature a 20 Ra product contact surface finish. Material heat numbers are available on all product contact components. Standard Feature and Benefits
- Designed to be Cleanable-in-Place (CIP)
- High efficiency, low NPSHR design for a wide variety of applications.
- One size mechanical seal for all S200 Series models; reducing parts inventory and cost (commercial seals available)
- Integral impeller/shaft design for fewer parts, greater concentricity and easy maintenance
- Close coupled pumps use NEMA JM Frame motors with larger diameter shafts and bearings (compared to C Frame motors)
- Horizontal, vertical and 45° angle discharge port orientation available
- Impellers, casing, and backplate are machined from wrought 316L SS
- Stainless steel motor adapters
- Reduced validation time
- Documentation package
- FDA approved fluroelastomers
- USP Class VI elastomers
- 3-A approved and EHEDG certified
MODEL S2045
NOTE: Pump housing may have larger diameter than motor, and require leg kit or motor shims.
Unit Width Height
| FRAME | **A in (mm) |
**AB in (mm) |
**CP in (mm) |
D in (mm) |
***F in (mm) |
LP in (mm) |
MP in (mm) |
**O in (mm) |
|---|---|---|---|---|---|---|---|---|
| 145JM |
9.32 (237)
|
5.73 (145)
|
17.52 (445)
|
3.50 (89)
|
0.88 (22)
|
2.92 (74)
|
3.43 (87)
|
7.10 (180)
|
| 182JM |
9.32 (237)
|
5.73 (145)
|
18.90 (480)
|
4.50 (114)
|
0.88 (22)
|
2.92 (74)
|
3.43 (87)
|
8.10 (206)
|
| 184JM |
11.11 (282)
|
6.87 (174)
|
20.15 (512)
|
4.50 (114)
|
1.09 (28)
|
2.92 (74)
|
3.43 (87)
|
8.49 (216)
|
**Motor dimensions may vary depending on motor manufacturer
***F dimension = conduit size
NOTE: Pump dimensions are based on S-Line connectors.
Fluid Head
| MODEL | INLET in (mm) |
OUTLET in (mm) |
X in (mm) |
Y in (mm) |
Z in (mm) |
|---|---|---|---|---|---|
| 2045 | 1.5 (40) | 1.5 (40) | 3.88 (98) | 1.81 (46) | 2.25 (57) |
| 2045 | 2.0 (50) | 1.5 (40) | 3.88 (98) | 1.81 (46) | 2.25 (57) |
Note: Waukesha Cherry-Burrell (WCB) curves are intended for use as an aid for preliminary selection of pumps by trained and qualified engineers. All selections must be reviewed by authorized SPX FLOW personnel prior to placing an order. SPX FLOW is not responsible for unauthorized or incorrect selections resulting from the use of these curves.
60 Hz - 1750 RPM Curves:
1½" x 1½" x 4½" Model S2045 - 60 Hz Pump Curve, 95-07014 || PDF
2" x 1½" x 4½" Model S2045 - 60 Hz Pump Curve, 95-07013 || PDF
60 Hz - 3500 RPM Curves:
1½" x 1½" x 4½" Model S2045 - 60 Hz Pump Curve, 95-07015 || PDF
2" x 1½" x 4½" Model S2045 - 60 Hz Pump Curve, 95-07016 || PDF
50 Hz - 1450 RPM Curves:
1½" x 1½" x 4½" Model S2045 - 50 Hz Pump Curve, 95-07046 || PDF
2" x 1½" x 4½" Model S2045 - 50 Hz Pump Curve, 95-07045 || PDF
50 Hz - 2900 RPM Curves:
1½" x 1½" x 4½" Model S2045 - 50 Hz Pump Curve, 95-07025 || PDF
2" x 1½" x 4½" Model S2045 - 50 Hz Pump Curve, 95-07026 || PDF
