Talulah™ Ballast Pumps
High Performance in a Smaller Package!
- F4B-1207 Ballast Pump
- Built in Thermal Overload Protection with automatic reset upon cooling
- Ideal for system with tank monitoring for overfill and protection against dry-run while emptying
- Retrofit Ready for existing wake and watersport boats with approved electrical and plumbing specifications
- Improved impeller compounds designed for short duration *dry-run events to keep you on the water longer
- High Performance and High Output for intermittent duty cycles
- Professional installation recommended (Acc. to ISO 10133)
- Best used with fully charged battery banks and alternators running
- Limited 3 Year Warranty
*Dry-Run: when the pump runs out of water, still moistened with residual water or lubricated with Johnson Pump Impeller Lube. Maximum dry-run condition of 30 seconds without harming impeller.
Technical Data
| Talulah Impeller Kit | 09-824P-2 |
| Flow | 13.5 GPM |
| Voltage | 13.6VDC |
| Connection | External 1" standard hose Internal 1/2" NPT (female) |
| Minimum Hose Size | 1" (Ø25.4 mm) |
| Standards | Meets ISO 8846 & SAE J1171 |
| Degree of Protection | IP 54 |
| Wire Size | Min. 12 AWG |
| Fuse Size | 25A |
| Amp Draw @ Pumping | 14A |
| Amp Draw @ Reversal | Up to 18A |
See this product in the Johnson Pump Marine Catalog: US ‖ GB ‖ DE ‖ ES ‖ FI ‖ SV
Talulah HF (High Flow) The defining high performance ballast pump for today’s wake and watersport boats
- Built in Thermal Overload Protection with automatic reset upon cooling
- Ideal for system with tank monitoring for overfill and protection against dry-run while emptying
- Retrofit Ready for existing wake and watersport boats with approved electrical and plumbing specifications
- Improved impeller compounds designed for short duration *dry-run events to keep you on the water longer
- High Performance and High Output for intermittent duty cycles
- Professional installation recommended (Acc. to ISO 10133)
- Best used with fully charged battery banks and alternators running
- Limited 3 Year Warranty
*Dry-Run: when the pump runs out of water, still moistened with residual water or lubricated with Johnson Pump Impeller Lube. Maximum dry-run condition of 30 seconds without harming impeller.
Technical Data
| Talulah Impeller Kit | 09-849P-2 |
| Flow | 30 GPM (1ft lift) 1 1/2" Hose |
| Voltage | 13.6VDC |
| Connection | External 1 1/2" NPTF |
| Minimum Hose Size | 1 1/2" (Ø38 mm) |
| Standards | Meets ISO 8846 & SAE J1171 |
| Degree of Protection | IP 54 |
| Wire Size | Min. 12 AWG |
| Fuse Size | 50A |
| Amp Draw @ Pumping | 25A |
| Amp Draw @ Reversal | Up to 45A |
