SPXFLOW
PRODUCTS BRANDS SOLUTIONS Industries Service & Support About
Search Blog Careers News Events Partner Portal IconPartner Portal
BacktoMain
Brands
Anhydro
APV
Bolting Systems
Bran+Luebbe
Gerstenberg Schrӧder
Hytec
Johnson Pump
Johnson Pump Marine
Lightnin
Philadelphia
Plenty
Power Team
Seital Separation
SPX Rail Systems
Stelzer
Stone
Tigerholm
Uutechnic
Waukesha Cherry-Burrell
BacktoMain
Solutions
Automation
Heat Transfer
Homogenization
Hydraulic Technologies
Membrane FIltration
Mixing & Blending
Separation
Thermal Processing UHT
Back to Main
Industries
Aerospace
Chemical
Dairy
Fats & Oils
Food & Beverage
Oil and Gas
Personal Care
Pharmaceutical
Water and Wastewater Treatment
Horticulture
Agriculture / Aquaculture
Automotive
Construction
Defense & Military
Electric Vehicle
HVAC
Mining
Plumbing
Power & Energy
Pulp & Paper
Rail
Recreational Marine
Shipbuilding
BacktoMain
About
  • Our Company
  • Sustainability
  • Leadership
BacktoMain
Products
BY TYPE
BY BRAND
BY APPLICATION
BY INDUSTRY
  • Analyzers
  • Automation Systems
  • Butter Equipment
  • Centrifuges
  • Cleaning-in-Place Systems
  • Controlled Bolting
  • Deareators
  • Draught Regulators
  • Dryers
  • Evaporators
  • Fat Crystalization Equipment
  • Filters & Strainers
  • Heat Exchangers
  • Homogenizers
  • Membrane Filtration Systems
  • Microparticulation Systems
  • Mixers & Agitators
  • Pigging Systems
  • Plumbing Products
  • Pumps
  • Recreational Marine Products
  • Spin Flash Dryers
  • Spray Dryers
  • UHT Systems
  • Valves
  • Anhydro
  • APV
  • Bolting Systems
  • Bran+Luebbe
  • Gerstenberg Schrӧder
  • Hytec
  • Johnson Pump
  • Johnson Pump Marine
  • Lightnin
  • Philadelphia
  • Plenty
  • Power Team
  • Seital Separation
  • SPX Rail Systems
  • Stelzer
  • Stone
  • Tigerholm
  • Uutechnic
  • Waukesha Cherry-Burrell
  • Adhesives & Sealants
  • Automotive Heating System
  • Baby Food
  • Bakery Filing Cream
  • Beer, Cider, Wine & Spirits
  • Boats & Watercraft
  • Building Infrastructure
  • Butter & Spreads
  • Cement
  • Cheese
  • Chocolate
  • Coffee & Tea
  • Condiments, Sauces & Soups
  • Cosmetics
  • Dairy Powders
  • Flavors & Fragrances
  • Fruit Juice
  • Fuel Supply System
  • Hair, Nail & Skin Care Products
  • Ice Cream
  • Inorganic Chemicals
  • Margarine & Shortening
  • Meat & Animal-Based Proteins
  • Milk & Cream
  • Neutralization
  • Nutraceuticals
  • Oral Care
  • Paints & Coatings
  • Petrochemicals
  • Pipelines
  • Plant-Based Food & Beverages
  • Plastic & Resins
  • Refinery
  • Soft Drinks
  • Solvents & Solutions
  • Specialty Chemicals
  • Synthetic Rubber
  • Yogurt
  • Aerospace
  • Chemical
  • Dairy
  • Fats & Oils
  • Food & Beverage
  • Oil and Gas
  • Personal Care
  • Pharmaceutical
  • Water and Wastewater Treatment
  • Horticulture
  • Agriculture / Aquaculture
  • Automotive
  • Construction
  • Defense & Military
  • Electric Vehicle
  • HVAC
  • Mining
  • Plumbing
  • Power & Energy
  • Pulp & Paper
  • Rail
  • Recreational Marine
  • Shipbuilding
BacktoMain
Service & Suport
APV Aftermarket & Service
  • APV Aftermarket Test Page
APV Plate Heat Exchanger Services
APV Valve Aftermarket & Service
APV Homogenizer Services
WCB Aftermarket & Service

Kombinator® SHCW - Scraped Surface Heat Exchangers

Product Type(s) : Fat Crystallization Equipment
Description :

The Gerstenberg Schröder Kombinator® 250 SHCW is a compact, high-capacity, high-pressure scraped surface heat exchanger. It is designed for the pasteurization of mainly low-fat spread emulsions which contain a high amount of protein and stabilizers to avoid fouling of the emulsion on the inner surface of the tubes and allow for longer and more efficient production time. It provides high performance, minimal downtime, and easy maintenance.

WHERE TO BUY REQUEST PRICING

FEATURES

The Kombinator® 250 SHCW is designed to meet market demand for high-quality products with low-cost production.


The Kombinator SHCW  is available as a short version (250S), and a long version (250L), and consists of one or two steam heated tubes and a double-walled, water-cooled cooling coil (tubular heat exchanger) for higher cooling efficiency. It can use cooling water, chilled water, brine, glycol, steam, or hot water as the cooling/heating medium. Each tube is equipped with automatic temperature regulation for accurate adjustment of the heating temperature.  The design is robust, reliable and built to last in order to meet our customers’ wide ranging product requirements.  The Kombinator 250 SHCW is designed according to PED pressure regulations.

Function and Principles of Operation
The product is pumped into the heating tubes where it is heated to pasteurization temperature by steam. The constant centrifugal forces generated during rotation press the scrapers in the rotor system against the heating tube. This ensures excellent heat transfer as well as efficient scraping of the emulsion from the interior tube surface. The emulsion is then cooled in the cooling coil situated above the heating tubes. The double tube coil is cooled with water on the outside as well on the inside of the tube wall for quick and efficient cooling of the emulsion.

Capacity
Up to 8.8 t/hour

Advantages

  • Constant high product quality and consistency.
  • Hygienic design suitable for the food industry. All product contacting parts are made in stainless steel AISI 316.
  • Completely sealed, fully insulated, corrosion-free stainless steel casing guarantees years of trouble-free operation.
  • Special, corrugated  multi-layer chilling tubes provide long, cost effective uptimes and improved heat transmission values while preventing internal build-up of compressor oil.
  • Heating tubes can be easily inspected and replaced.
  • Heating temperature in each individual tube is automatically regulated for accurate temperature profile control of the product.
  • Different rotor diameters adapt to the required holding time and flow speed.
  • All rotors are equipped with separate motors to adapt the scraping rate to the viscosity and product to obtain the best heat transfer results.
  • Rotor shaft speeds are variable as each shaft is driven by a separate gear motor.
  • Wide range of scrapers in different materials and shaped for best cooling results depending on viscosity and application formula.
  • Minimum downtime as CIP cycles are fast and efficient, and maintenance procedures are simple.
  • Low energy, cast iron gear box yields maximum power while keeping noise levels to a minimum.
  • Double tube coil cooled with water on the outside as well on the inside of the tube wall for quick and efficient cooling of the emulsion.
Key Applications

Fats and Oils Industry
Margarine products that require pasteurization i.e.

  • Margarine with high content of protein and stabilizers
  • Low fat spread emulsions with high content of protein and stabilizers.

Downloads

Related

Products

Consistator® MD - Scraped Surface Heat Exchangers
Nexus - Pilot Plant For Fat Crystallization - Small Scale Scraped Surface Heat Exchangers
Perfector® 125 - Scraped Surface Heat Exchangers
Perfector® 150 - Scraped Surface Heat Exchangers
Perfector® 180 - Scraped Surface Heat Exchangers
Kombinator® 250S - Scraped Surface Heat Exchangers
Kombinator® 250L - Scraped Surface Heat Exchangers
Nexus - Scraped Surface Heat Exchangers
High Pressure Plunger Pump
Pin Rotor Machine
Resting Tube for Margarine
Plate Pasteurizer Unit
Plate Remelt Unit
Hot Water Unit
SmartLogic Process Control System

FEATURES

The Kombinator® 250 SHCW is designed to meet market demand for high-quality products with low-cost production.


The Kombinator SHCW  is available as a short version (250S), and a long version (250L), and consists of one or two steam heated tubes and a double-walled, water-cooled cooling coil (tubular heat exchanger) for higher cooling efficiency. It can use cooling water, chilled water, brine, glycol, steam, or hot water as the cooling/heating medium. Each tube is equipped with automatic temperature regulation for accurate adjustment of the heating temperature.  The design is robust, reliable and built to last in order to meet our customers’ wide ranging product requirements.  The Kombinator 250 SHCW is designed according to PED pressure regulations.

Function and Principles of Operation
The product is pumped into the heating tubes where it is heated to pasteurization temperature by steam. The constant centrifugal forces generated during rotation press the scrapers in the rotor system against the heating tube. This ensures excellent heat transfer as well as efficient scraping of the emulsion from the interior tube surface. The emulsion is then cooled in the cooling coil situated above the heating tubes. The double tube coil is cooled with water on the outside as well on the inside of the tube wall for quick and efficient cooling of the emulsion.

Capacity
Up to 8.8 t/hour

Advantages

  • Constant high product quality and consistency.
  • Hygienic design suitable for the food industry. All product contacting parts are made in stainless steel AISI 316.
  • Completely sealed, fully insulated, corrosion-free stainless steel casing guarantees years of trouble-free operation.
  • Special, corrugated  multi-layer chilling tubes provide long, cost effective uptimes and improved heat transmission values while preventing internal build-up of compressor oil.
  • Heating tubes can be easily inspected and replaced.
  • Heating temperature in each individual tube is automatically regulated for accurate temperature profile control of the product.
  • Different rotor diameters adapt to the required holding time and flow speed.
  • All rotors are equipped with separate motors to adapt the scraping rate to the viscosity and product to obtain the best heat transfer results.
  • Rotor shaft speeds are variable as each shaft is driven by a separate gear motor.
  • Wide range of scrapers in different materials and shaped for best cooling results depending on viscosity and application formula.
  • Minimum downtime as CIP cycles are fast and efficient, and maintenance procedures are simple.
  • Low energy, cast iron gear box yields maximum power while keeping noise levels to a minimum.
  • Double tube coil cooled with water on the outside as well on the inside of the tube wall for quick and efficient cooling of the emulsion.
Key Applications

Fats and Oils Industry
Margarine products that require pasteurization i.e.

  • Margarine with high content of protein and stabilizers
  • Low fat spread emulsions with high content of protein and stabilizers.

Downloads

Anhydro APV Bolting Systems Bran+Luebbe Gerstenberg Schrӧder
Hytec Johnson Pump Johnson Pump Marine Lightnin Philadelphia
Plenty Power Team Seital Separation SPX Rail Systems Stelzer
Stone Tigerholm Uutechnic Waukesha Cherry-Burrell
Events Careers Investors Terms of Use
Data Privacy Terms & Conditions Disclosure Statements