Skip Navigation

Universal Twin Screw Series - Positive Displacement Pumps

FEATURES

双作用
我们的双螺杆泵既可输送物料，又可作为原位清洁（CIP）泵，满足不同工艺需求。采用先进的技术，简化了螺杆更换过程，无需重新同步螺杆轴。操作简便易行，减少停机时间，提高生产效率。

维护简便性
前置密封设计，可快速更换密封，提高了便利性。采用自对中法兰外壳，联轴器对齐更容易，无需在维修工作后重新对齐。为方便用户使用，可选配 直联式电机适配器 。

WTS 泵有两种型号，可满足行业的特定要求。

  • 3A 授权认证：WTS 70, 104, 130
  • EHEDG 认证：WTS 70, 104, 130, 180
关键应用

食品和饮料

  • 汤、炖菜、番茄酱
  • 蔬菜、调料
  • 巧克力、油脂
  • 面糊、奶油馅料
  • 啤酒、麦芽汁
  • 软饮料/水果饮料
  • 肉类加工

 

 

乳制品

  • 奶油、牛奶
  • 奶酪凝乳和乳清
  • 农家干酪
  • 酸奶

 

 

制药/化妆品

  • 药膏
  • 糖浆、提取物、浆状物
  • 面霜和乳液
  • 发胶和发液
  • 染色剂和酒类
  • 肥皂
  • 化妆品

 

 

化工/工业

  • 溶剂、油漆
  • 燃料
  • 树脂、聚合物和污泥
  • 油和润滑剂

MODEL 015-UTS

0-3500 RPM speed range. 2" (51 mm) cover port and 1.5" (38 mm) body port sizes; suitable to 375 PSI (25.5 bar) differential pressure. Temperature range -40°F (-40°C) to 300°F (149°C).

 

  A B C D
+.000 -.001		 E F G H I COVER PORT BODY PORT WEIGHT
IN
16.40

15.32
10.27
0.875
4.95
7.68
 7.28
11.84
 1.40 1.50, 2.00 1.50, 2.00  87 lbs
MM
417
389
261
22.23
126
195
 185
301
 36 38, 51 38, 51  39 kg

NOTE: Dimensions are for guidance purposes only. Contact your SPX FLOW Representative if more detailed measurements are needed.

1 Shaft key dimension: .187 x .187 x 1.125 in / 5 x 5 x 29 mm

Approximate shipping weight 87 lb. (39 kg.)

Port Options

 
Sanitary Clamp (S-Line*, I-Line, Q-Line) Bevel Seat Optional European Types; DIN, SMS, RJT Optional Aseptic Ports:
1 - Steam In
2 - Steam Out

*S-Line standard. Contact SPX FLOW for available rectangular flange inlets. 

 

Screw Pitches

 
Narrow Middle Wide

 

O-rings

Standard:  FKM Standard
Options:  Fluoroelastomer (FKM), EPDM, Fluoroelastomer (FFKM)

 

Seals

Single or Double Mechanical Seals Available

Mechanical seal material options:

  • Carbon
  • Silicon Carbide
  • Tungsten Carbide

Elastomer choices for O-rings:

  • Fluoroelastomer (FKM)
  • EPDM
  • FFKM
Tru-Fit®

Close coupled Tru-Fit® pump mounted on stainless steel base with stainless steel adaptors standard.

Features:

  • No shaft alignment necessary. No coupling guard required.
  • Special base design enhances cleanability.
  • Reduces overall length of complete unit by an average of 20-25%.
  • Average of 20-25 gear ratios available per horsepower.
  • Separate oil sump for gear reducer and timing gears.

Options:

  • 304 SS polished plate base.
  • NEMA or IEC frames available. Right angle reducer also available for
    additional space savings.
  • 1/2 through 60 horsepower drive options available.
  • Horizontal or vertical porting.

VIDEOS

Downloads